Towards the end of November 2017, A-Core of Idaho Concrete Pouring Division was hired to pour a shop slab in an existing structure at a large steel erection company in Idaho Falls, ID. The customer called A-Core for several reasons to tackle this project starting with the great relationship we have built throughout the years, competitive pricing and what sets us apart from the our competitors is our laser screed. The 12,000 square foot shop had a dirt floor that A-Core had to excavate down 6” all throughout, as well as excavate as needed for the footings required for the customer to install their cranes. From that point, the grade was leveled and compacted. We then tied rebar 18” on center throughout the slab as well as adding rebar as needed for the crane footings. Concrete was then pumped into the building where we were able to use our laser screed, making the slab perfectly flat. The finish of the slab required us to use our riding power trowel, giving the slab a nice slick finish. Our pouring division was able to complete the project start to finish in less than a week. A-Core then took the extra step to have the slab tested for its flatness where we were graded very high / very flat. Overall, the owner of the steel company called A-Core’s team thanking us for completing the job on time, on budget and he said that the slab looked incredible.
We recognize the effort A-Core crews put forth to finish the I-15 joint saw and reseal project ahead of schedule. We are grateful for the extra effort put forth and commend A-Core on the high quality crews and supervisors they employ. We are overall very pleased with the work performed on this project and with the good working relationship established with A-Core. We look forward to working with them on future projects.
A-Core deserves a great deal of praise for your technical knowledge and positive attitude in performing this work on the Los Alamos National Laboratory.
I am Nathan Jones, Plant Engineer with Avista at Noxon Rapids Dam. Over the past weeks, Billy and his crew worked for Lydig on our transformer deck sump project. I was impressed with A-Core and Billy's work, and would like to pass on my compliments to him and his crew.The cutting project was not easy. As an active and operating hydro dam, our drains go directly to the river. Extreme care had to be taken during all stages of work to eliminate any waste or drain flow. While cutting the sumps in directly over and around the drains, Billy and his crew had zero spill incidents due to exercising the required care and controls necessary to maintain this requirement. This required continuous cleanup and housekeeping, and was performed to meet all our requirements.In addition, Billy and his crew maintained an aggressive pace to keep up with Lydigs' requirements and our schedule.
Just wanted you to know what a great job Billy and Rex did. They are highly professional and very hard working. Their ability to work with everyone and their attitude when dealing with the owner and Lydig was awesome. I would and will highly recommend them and A-Core to everyone. I hope the rest of my subs are as good as you guys.
This letter is to inform you of the VERY professional attitude exhibited by the A-Core personnel that performed the coring service for our project at Luke AFB. The professionalism was not only in the gentlemen's greeting but also in the work that he performed. This person took the time to protect the building with plastic to keep the residue from the coring off of the building exterior and even washed down the wall to remove what residue the plastic sheathing did not catch. This is not a common occurrence from cutting companies and A-Core will receive my highest rating.
On behalf of Jacobsen Construction along with the other project management firms of Big-D Construction and Layton Construction that were involved in the overall design and construction experience, we are appreciative of your support to assist in the constructing of this facility. It was especially gratifying to see the members of this organization come together, especially in this time of economic downturn, and work together to build this new facility. We are grateful to be associated with so many wonderful construction related firms such as yours.
On behalf of The Lowell construction project in Park City, Utah, I want to thank you for responding to our needs so quickly and professionally. Your employees are well qualified. Ray Fonseca is one of them. He has consistently been the best core driller that has worked on this project. He has great abilities and instincts, always mindful of safety and eager to get the job done in a timely fashion, as well as respectful of everyone on the jobsite. Thanks again for your help on this difficult project, you have been a valuable member of my team, we look forward to using A-Core again on future projects.
I would like to just take a minute to say what an awesome job your Yuma crew performed. All work was performed in a professional manor and the job was completed faster and better than I could of imagined. Looking forward to working A-Core on the next phase and future projects.